[Barrelfish-users] Errors while building barrelfish.

Vamshi Krishna vamshi4ms at gmail.com
Thu Sep 25 10:12:06 CEST 2014


Hi,

I just tried for about 10 times and even this is not helpful.

-Vamshi.

On Thu, Sep 25, 2014 at 1:05 AM, Martynas Pumputis <mpumputi at student.ethz.ch
> wrote:

> Hi,
>
> As a dirty workaround to this problem, I suggest you to run multiple
> make jobs by using `make -j8`.
>
> Best,
> Martynas
>
> On 09/25/2014 10:04 AM, Vamshi Krishna wrote:
> > Hi Stefan,
> >
> > I tried building only the header file but it did not help.
> > I am still facing the same error!
> >
> > In file included from ../lib/posixcompat/pty.h:16:0,
> >                  from ../lib/posixcompat/write.c:18:
> > ../include/term/server/server.h:23:37: fatal error:
> > if/terminal_config_defs.h: No such file or directory
> >  #include <if/terminal_config_defs.h>
> >                                      ^
> > compilation terminated.
> > make: *** [x86_64/lib/posixcompat/_for_lib_posixcompat/write.o.depend]
> > Error 1
> >
> >
> > Then::
> > --> I tried building the header files manually i.e by the below
> procedure.
> >
> > ./tools/bin/flounder -i ../if/platform/x86_64.if -i ../if/arch/x86_64.if
> > -i ../if/types.if --generic-header ../if/terminal.if
> > ./x86_64/include/if/terminal_config_defs.h
> >
> > This resolved the dependency problem but i am facing some errors later
> > in the installation.
> >
> > 1.) Please tell me if it is ok to build manually like i did?
> > 2.) If yes What Flounder option should i mention to build the
> > terminal_config_defs.h?  Is --generic-header fine?
> >
> > Regards,
> > -Vamshi.
> >
> > On Sat, Sep 20, 2014 at 4:21 AM, Kästle Stefan
> > <stefan.kaestle at inf.ethz.ch <mailto:stefan.kaestle at inf.ethz.ch>> wrote:
> >
> >     This sounds like a build dependency problem. It's worth trying to
> >     manually trigger flounder to generate the missing file:
> >
> >     $ make ./x86_64/include/if/terminal_config_defs.h
> >
> >     And then rebuild:
> >
> >     $ make
> >
> >     Ultimately, the problem is that libterm includes a file that is
> >     generated by one of its dependencies. This is bad, because it
> >     requires to specify this dependency everywhere the library is used
> >     (in your case libposixcompat).
> >     <
> https://mail.ethz.ch/owa/?ae=PreFormAction&a=Reply&t=IPM.Note&id=RgAAAABf%2bEk9yT%2fyTKqIqwuNs5ufBwB0zMe5vmNwQIrN1QwanZ9MAAABkAJNAACES0pGgACqRp4v1%2b76RudLAAAd4PA3AAAJ&pspid=_1411199770424_328436972#
> >
> >
> >     Include files of libraries should be self-contained in the sense
> >     that they only include headers that are either part of the library
> >     itself or static external include files (such as system includes,
> >     i.e. files that do _not_ have to be generated). More often than we
> >     would like to, they are not ..
> >
> >     Cheers,
> >      Stefan
> >
> >     ________________________________
> >     From: Vamshi Krishna [vamshi4ms at gmail.com <mailto:
> vamshi4ms at gmail.com>]
> >     Sent: Friday, September 19, 2014 8:59 PM
> >     To: barrelfish-users at lists.inf.ethz.ch
> >     <mailto:barrelfish-users at lists.inf.ethz.ch>
> >     Subject: Re: [Barrelfish-users] Errors while building barrelfish.
> >
> >     Hi all,
> >
> >     I am trying to build the latest version of barrelfish on Linux-
> >     ubuntu 14.04 64 bit. Architecture x86_64.
> >
> >     I am facing the following error while building.
> >
> >     Generating x86_64/lib/posixcompat/_for_lib_posixcompat/write.o.depend
> >     In file included from ../lib/posixcompat/pty.h:16:0,
> >                      from ../lib/posixcompat/write.c:18:
> >     ../include/term/server/server.h:23:37: fatal error:
> >     if/terminal_config_defs.h: No such file or directory
> >      #include <if/terminal_config_defs.h>
> >                                          ^
> >     compilation terminated.
> >     make: ***
> >     [x86_64/lib/posixcompat/_for_lib_posixcompat/write.o.depend] Error 1
> >
> >     I tried looking up in the code for the file but couldn't find.
> >     Please help resolve this issue.
> >
> >     Regards,
> >     -Vamshi.
> >
> >
> >     On Fri, Sep 19, 2014 at 1:39 AM, Stefan Kaestle
> >     <stefan.kaestle at inf.ethz.ch
> >     <mailto:stefan.kaestle at inf.ethz.ch><mailto:
> stefan.kaestle at inf.ethz.ch <mailto:stefan.kaestle at inf.ethz.ch>>>
> >     wrote:
> >     Hi Vamshi,
> >
> >     As the error message suggests, you are missing parsec. On a typical
> >     Debian/Ubuntu system, the required package is typically called
> >     libghc-parsec2-dev
> >
> >     For more information, read
> >     http://wiki.barrelfish.org/Getting_Started and
> >     http://hg.barrelfish.org/barrelfish/file/tip/README.
> >
> >     Cheers,
> >      Stefan
> >
> >
> >     On 09/19/2014 10:29 AM, Vamshi Krishna wrote:
> >     Hi all,
> >
> >     I am trying to build the latest version of barrelfish on Linux-
> >     ubuntu 14.04 64 bit. Architecture x86_64.
> >
> >     I successfully built the makefile but while i try to build
> >     barrelfish, i get below errors. Please help me resolve.
> >
> >     touch ./x86_64/trace_definitions/.marker
> >     mkdir -p ./x86_64/tools/asmoffsets
> >     touch ./x86_64/tools/asmoffsets/.marker
> >     mkdir -p ./x86_64/lib/posixcompat/_for_lib_posixcompat
> >     touch ./x86_64/lib/posixcompat/_for_lib_posixcompat/.marker
> >     ghc -i../tools/flounder -odir  ./tools/tools/flounder -hidir
> >     ./tools/tools/flounder -rtsopts=all --make
> >     ../tools/flounder/Main.lhs -o  ./tools/bin/flounder
> >
> >     ../tools/pleco/Parser.hs:22:8:
> >         Could not find module `Text.ParserCombinators.Parsec.Language'
> >         Use -v to see a list of the files searched for.
> >     make: *** [tools/bin/pleco] Error 1
> >     make: *** Waiting for unfinished jobs....
> >
> >     ../tools/flounder/Parser.hs:25:8:
> >         Could not find module `Text.ParserCombinators.Parsec.Language'
> >         Use -v to see a list of the files searched for.
> >     make: *** [tools/bin/flounder] Error 1
> >
> >     ../tools/hamlet/Parser.hs:21:8:
> >         Could not find module `Text.ParserCombinators.Parsec.Language'
> >         Use -v to see a list of the files searched for.
> >     make: *** [tools/bin/hamlet] Error 1
> >
> >     Regards,
> >     -Vamshi.
> >
> >
> >
> >
> >     _______________________________________________
> >     Barrelfish-users mailing list
> >     Barrelfish-users at lists.inf.ethz.ch
> >     <mailto:Barrelfish-users at lists.inf.ethz.ch><mailto:
> Barrelfish-users at lists.inf.ethz.ch
> >     <mailto:Barrelfish-users at lists.inf.ethz.ch>>
> >     https://lists.inf.ethz.ch/mailman/listinfo/barrelfish-users
> >
> >
> >
> >     --
> >     Stefan
> >     http://people.inf.ethz.ch/skaestle/
> >
> >     _______________________________________________
> >     Barrelfish-users mailing list
> >     Barrelfish-users at lists.inf.ethz.ch
> >     <mailto:Barrelfish-users at lists.inf.ethz.ch><mailto:
> Barrelfish-users at lists.inf.ethz.ch
> >     <mailto:Barrelfish-users at lists.inf.ethz.ch>>
> >     https://lists.inf.ethz.ch/mailman/listinfo/barrelfish-users
> >
> >
> >
> >
> >
> > _______________________________________________
> > Barrelfish-users mailing list
> > Barrelfish-users at lists.inf.ethz.ch
> > https://lists.inf.ethz.ch/mailman/listinfo/barrelfish-users
> >
>
> _______________________________________________
> Barrelfish-users mailing list
> Barrelfish-users at lists.inf.ethz.ch
> https://lists.inf.ethz.ch/mailman/listinfo/barrelfish-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.inf.ethz.ch/pipermail/barrelfish-users/attachments/20140925/2818b629/attachment-0001.html 


More information about the Barrelfish-users mailing list