[Barrelfish-users] [Barrelfish] New Barrelfish Release
Artur Barczyk (artbarcz)
artbarcz at cisco.com
Thu Sep 24 16:57:52 CEST 2015
Hi Gerd - sure, (partial) output below
Thanks,
Artur
artur:build>make install
Additional submodules:
+ shoal: [NO]
+ green-marl: [NO]
+ green-marl: [DISABLED]
Installing modules...
> Installing x86_64/sbin/elver
mkdir: cannot create directory ‘/home/netos’: Permission denied
install: cannot create regular file
‘/home/netos/tftpboot/artur/x86_64/sbin/elver’: No such file or directory
> Installing x86_64/sbin/cpu
mkdir: cannot create directory ‘/home/netos’: Permission denied
[many many more of these..]
On 9/24/15, 16:53, "Gerd Zellweger" <gerd.zellweger at inf.ethz.ch> wrote:
>Hi Artur,
>
>Can you try: make install
>
>Gerd
>
>On 2015-09-24 16:51, Artur Barczyk (artbarcz) wrote:
>> Hi David,
>>
>> the makefile generated seems not to work, make without targets does not
>> build barrelfish, just gives the help text. I am using ubuntu 14.10,
>> gcc
>> v4.9.1 and ghc 7.6.3, which works fine with a previous barrelfish
>> release
>> I pulled during summer.
>> A suspicious statement when running hake is "Evaluating 0 HakefilesŠ² -
>> full output below. Nearly ashamed to admit to not being a fluent
>> haskell
>> speaker, any help would be greatly appreciated! :-)
>>
>> Thanks,
>> Artur
>>
>>
>> artur:build>../hake/hake.sh -s .. -a x86_64
>> Install directory defaulting to '.'
>> Source directory is ..
>> Architectures to build: "x86_64"
>> Creating a local hake directory...
>> Setting up hake build directory...
>> Bootstrapping Config.hs
>> Creating new symbolic_targets.mk file.
>> Building hake...
>> [ 1 of 16] Compiling Tools ( ../hake/Tools.hs, hake/Tools.o
>> )
>> [ 2 of 16] Compiling TreeDB ( ../hake/TreeDB.hs,
>> hake/TreeDB.o )
>> [ 3 of 16] Compiling HakeTypes ( ../hake/HakeTypes.hs,
>> hake/HakeTypes.o )
>> [ 4 of 16] Compiling Args ( ../hake/Args.hs, hake/Args.o )
>> [ 5 of 16] Compiling Config ( hake/Config.hs, hake/Config.o )
>> [ 6 of 16] Compiling ArchDefaults ( ../hake/ArchDefaults.hs,
>> hake/ArchDefaults.o )
>> [ 7 of 16] Compiling X86_64 ( ../hake/X86_64.hs,
>> hake/X86_64.o )
>> [ 8 of 16] Compiling K1om ( ../hake/K1om.hs, hake/K1om.o )
>> [ 9 of 16] Compiling X86_32 ( ../hake/X86_32.hs,
>> hake/X86_32.o )
>> [10 of 16] Compiling ARMv5 ( ../hake/ARMv5.hs, hake/ARMv5.o
>> )
>> [11 of 16] Compiling XScale ( ../hake/XScale.hs,
>> hake/XScale.o )
>> [12 of 16] Compiling ARMv7 ( ../hake/ARMv7.hs, hake/ARMv7.o
>> )
>> [13 of 16] Compiling ARMv7_M ( ../hake/ARMv7_M.hs,
>> hake/ARMv7_M.o
>> )
>> [14 of 16] Compiling ARMv8 ( ../hake/ARMv8.hs, hake/ARMv8.o
>> )
>> [15 of 16] Compiling RuleDefs ( ../hake/RuleDefs.hs,
>> hake/RuleDefs.o )
>> [16 of 16] Compiling Main ( ../hake/Main.hs, hake/Main.o )
>> Linking hake/hake ...
>> Running hake...
>> Source directory: .. (/home/artur/barrelfish)
>> BF Source directory: .. (/home/artur/barrelfish)
>> Install directory: . (/home/artur/barrelfish/build)
>> Scanning directory tree...
>> Creating Makefile...
>> Evaluating 0 Hakefiles...
>> Generating build directory dependencies...
>> Now running initial make to build dependencies.
>> Running 4 jobs at once (-j N to change this).
>> ------------------------------------------------------------------
>> This is the 'help' target for the Barrelfish Makefile. This Makefile
>> has been generated by hake in the top-level directory of your build
>> tree.
>> See the Hake documentation for more information.
>>
>>
>> This Makefile contains build targets for the following architectures:
>>
>>
>> x86_64
>>
>>
>> To change configuration options, edit the Config.hs file in the hake
>> subdirectory of this directory and run 'make rehake'.
>>
>>
>> To change the set of symbolic make targets available (for example, to
>> build a different set of modules or architectures for your boot image),
>> edit the local copy of the symbolic_targets.mk in this directory.
>>
>>
>> Useful make targets:
>> - <file>: any file which can be built in the Barrelfish tree
>> - 'help': show this help text
>> - 'help-platforms': show the platforms (file collections) which can be
>> built
>> - 'help-boot': show the boot sequences which can be initiated
>> - 'clean': remove most generated files
>> - 'realclean': remove all generated files (clears the build tree)
>> - 'rehake': attempt to re-run hake
>>
>>
>> artur:build>make
>> ------------------------------------------------------------------
>> This is the 'help' target for the Barrelfish Makefile. This Makefile
>> has been generated by hake in the top-level directory of your build
>> tree.
>> See the Hake documentation for more information.
>>
>>
>> This Makefile contains build targets for the following architectures:
>>
>>
>> x86_64
>>
>>
>> To change configuration options, edit the Config.hs file in the hake
>> subdirectory of this directory and run 'make rehake'.
>>
>>
>> To change the set of symbolic make targets available (for example, to
>> build a different set of modules or architectures for your boot image),
>> edit the local copy of the symbolic_targets.mk in this directory.
>>
>>
>> Useful make targets:
>> - <file>: any file which can be built in the Barrelfish tree
>> - 'help': show this help text
>> - 'help-platforms': show the platforms (file collections) which can be
>> built
>> - 'help-boot': show the boot sequences which can be initiated
>> - 'clean': remove most generated files
>> - 'realclean': remove all generated files (clears the build tree)
>> - 'rehake': attempt to re-run hake
>>
>>
>>
>>
>>
>>
>> On 9/3/15, 09:56, "David Cock" <david.cock at inf.ethz.ch> wrote:
>>
>>> Dear all,
>>>
>>> We are pleased to announce a new release of the Barrelfish OS. This
>>> release includes large page support on ARM, and a significant overhaul
>>> of the build system. Runtime and memory consumption of Hake have
>>> dropped by a factor of 10 and 20, respectively. The new build system
>>> also introduces the concept of 'build platforms' - top-level targets
>>> for
>>> each platform (e.g. x86_64 or PandaboardES). Almost all Makefile
>>> targets are now generated by Hake - very little remains in
>>> symbolic_targets.mk.
>>>
>>> Support for Intel SCC and for ARM11MP (ARMv6) has been dropped in this
>>> release, as we no longer maintain the corresponding hardware. Code
>>> for
>>> these platforms will continue to be available via previous release
>>> tags
>>> in the repository.
>>>
>>> As always, you can get the latest version by cloning or pulling from
>>> our
>>> git repository [2].
>>>
>>> Cheers,
>>> -- David
>>>
>>> [2] git://git.barrelfish.org/git/barrelfish
>>>
>>> ---
>>> David Cock (51):
>>> Made errval_t a flounder builtin.
>>> Make build_pandaboard_image.sh use global ARM_GCC
>>> Generic modules shouldn't be listed under <arch>/
>>> Include modules_common in x86 builds
>>> Toolchain selection when bootstrapping builds
>>> WIP on a faster hake
>>> Generates a Makefile
>>> Replaced old hake
>>> Dependency generation for Flounder bindings relies on Flounder
>>> def headers
>>> Down to 12s, targets build
>>> Sped up path manipulation, down to 9.2s
>>> Use a set for arch comparison, 9.0s
>>> Walk directories in parallel (async)
>>> Cleanup
>>> Switched from hake.Path to System.FilePath
>>> Wasn't outputting Target tokens
>>> Replaced allfiles list with a Trie
>>> Fixed a few bugs in the new search combinators
>>> Keep directory lists sorted
>>> TreeDB merge operation
>>> Generate source-tree relative filenames straight away
>>> Cleanup
>>> Cleanup
>>> Set RTSOPTS on build
>>> Merge branch 'master' into hake-platforms
>>> Removed SCC
>>> New-style Xeon Phi build
>>> Made lib/numa compile on x86_32
>>> Add -Wformat explicitly wherever -Wformat-security appears
>>> ARMv5 & XScale build.
>>> Make hake.sh parallelism configurable (-j N)
>>> Better description of hake phases
>>> armv7-m (heteropanda) builds.
>>> Made optimisation flags overridable per-platform.
>>> XScale builds
>>> Update -j N guidance
>>> Removed ARM11MP - unsupported and non-functional.
>>> More reasonable error output from Hake
>>> Updated hake build rules
>>> Don't run hake twice for 'make rehake'
>>> Add explicit dependency from asmoffsets.s to errno.h
>>> Quieted make a little.
>>> Consolidated toolchain selection
>>> Fixed a broken tool path
>>> Updated harness builds to match hake.sh
>>> Document Haskell package dependencies for Hake
>>> ARMv5 doesn't actually use romfs_size.h
>>> Added pandaboards to eth_machinedata.py (harness)
>>> Added async dep for hake
>>> Split Fugu .h and .c generation
>>> Removed reference to SCC docs.
>>>
>>> Reto Achermann (2):
>>> monitor: handover of correct state for cap revocations
>>> monitor: bugfixes in the revocation protocol
>>>
>>> Simon Gerber (7):
>>> arm: implement flush cache debug syscall
>>> 32bit arm: fix large page support. Close T148.
>>> large page morecore: add command line options to test
>>> armv5: add missing cp15_invalidate_i_and_d_caches_fast()
>>> arm: fix caps_map_l1 for armv5 and remove panic()s in armv7
>>> monitor: remove old capability code
>>> monitor: distops: add missing free + assert in retrieve.
>>>
>>> Timothy Roscoe (2):
>>> Modularize symbolic targets a bit
>>> Simplification of symbolic_targets.mk, addition of platforms and
>>> boots to Hake.
>>>
>>>
>>> _______________________________________________
>>> Barrelfish mailing list
>>> Barrelfish at lists.inf.ethz.ch
>>> https://lists.inf.ethz.ch/mailman/listinfo/barrelfish
>>>
>>> _______________________________________________
>>> Barrelfish-users mailing list
>>> Barrelfish-users at lists.inf.ethz.ch
>>> https://lists.inf.ethz.ch/mailman/listinfo/barrelfish-users
>>
>>
>> _______________________________________________
>> Barrelfish-users mailing list
>> Barrelfish-users at lists.inf.ethz.ch
>> https://lists.inf.ethz.ch/mailman/listinfo/barrelfish-users
More information about the Barrelfish-users
mailing list