../tools/qemu-wrapper.sh --menu platforms/x86/menu.lst.x86_64 --arch x86_64 
Using menu file platforms/x86/menu.lst.x86_64
Initial kernel file: x86_64/sbin/elver
Initial RAM disk contents: x86_64/sbin/cpu loglevel=3,x86_64/sbin/init,x86_64/sbin/mem_serv,x86_64/sbin/monitor,x86_64/sbin/ramfsd boot,x86_64/sbin/skb boot,eclipseclp_ramfs.cpio.gz nospawn,skb_ramfs.cpio.gz nospawn,x86_64/sbin/kaluga boot,x86_64/sbin/acpi boot,x86_64/sbin/spawnd boot,x86_64/sbin/proc_mgmt boot,x86_64/sbin/startd boot,x86_64/sbin/routing_setup boot,x86_64/sbin/pci auto,x86_64/sbin/corectrl auto,x86_64/sbin/ahcid auto,x86_64/sbin/serial_pc16550d auto,x86_64/sbin/rtl8029 auto,x86_64/sbin/e1000n auto,x86_64/sbin/NGD_mng auto,x86_64/sbin/netd auto,x86_64/sbin/fish nospawn,x86_64/sbin/angler serial0.terminal xterm
Kernel command line arguments: loglevel=3
Requested architecture is x86_64.
e1000e not supported. Fall back to e1000
Creating hard disk image hd.img
Formatting 'hd.img', fmt=raw size=10485760
OK: about to run the follow qemu command:
qemu-system-x86_64         -machine type=q35         -smp 2         -m 1024         -netdev user,id=network0         -device e1000,netdev=network0
        -device ahci,id=ahci         -device ide-drive,drive=disk,bus=ahci.0         -drive id=disk,file=hd.img,if=none -nographic -kernel x86_64/sbin/elver -append 'loglevel=3' -initrd x86_64/sbin/cpu loglevel=3,x86_64/sbin/init,x86_64/sbin/mem_serv,x86_64/sbin/monitor,x86_64/sbin/ramfsd boot,x86_64/sbin/skb boot,eclipseclp_ramfs.cpio.gz nospawn,skb_ramfs.cpio.gz nospawn,x86_64/sbin/kaluga boot,x86_64/sbin/acpi boot,x86_64/sbin/spawnd boot,x86_64/sbin/proc_mgmt boot,x86_64/sbin/startd boot,x86_64/sbin/routing_setup boot,x86_64/sbin/pci auto,x86_64/sbin/corectrl auto,x86_64/sbin/ahcid auto,x86_64/sbin/serial_pc16550d auto,x86_64/sbin/rtl8029 auto,x86_64/sbin/e1000n auto,x86_64/sbin/NGD_mng auto,x86_64/sbin/netd auto,x86_64/sbin/fish nospawn,x86_64/sbin/angler serial0.terminal xterm
Makefile:196388: recipe for target 'qemu_x86_64' failed

WARNING: Image format was not specified for 'hd.img' and probing guessed raw.
         Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
         Specify the 'raw' format explicitly to remove the restrictions.
warning: TCG doesn't support requested feature: CPUID.01H:ECX.vmx [bit 5]
warning: TCG doesn't support requested feature: CPUID.01H:ECX.vmx [bit 5]
qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
make: *** [qemu_x86_64] Error 1