[Oberon] re: Partitions.Show failure

[Vasile Rotaru]

 Hi

> When I select the ATA/EIDE driver, Partition.Show fails with error 9.
> When I select the IDE(old) driver, Partition.Show/Create works OK, but Partition.Check fails. (Or it fails later with the same trap if I skip Partition.Check). I have tried to move the partition forth and back, but it didn't help. I will have to check the disk for bad blocks :(.
> 

  I have allocated a partition, I have checked it with linux "badblocks". No bad blocks found. But Partition.Check still fails. :(

  Vasile