[Oberon] BB, networking & database

[Rene Krywult]

Thank you. I tried, and now it seems better than before, but still not 
good enough.

OK, now these are my current settings from Aos.Par:

#Domain = "inf.ethz.ch"
Domain = "MSHeimnetz"
#Interface 1:
Int1.Name = "Han"
Int1.Device = "RTL8139#0"
Int1.DHCP="0"
Int1.LocalAdr="192.168.1.33"
Int1.Netmask="255.255.255.0"
Int1.Gateway="192.168.1.1"
#Int1.DNS0="dns1.rz.fddi.ethz.ch"
Int1.DNS0="195.3.96.67"
Int1.DNS1="199.60.118.2"
Int1.DNS2="192.168.183.254"

And that's the result as of Kernel.Log:

{P0
=== Interface ===
Interface name: Han
Attached device: RTL8139#0 (LinkNotLinked)
Local address: 192.168.1.33
Netmask: 255.255.255.0
Gateway address: 192.168.1.1
Subnet: 192.168.1.0
Net broadcast: 192.168.1.255
DNS server: 195.3.96.67
DNS server: 199.60.118.2
DNS server: 192.168.183.254
}

I see that the Looback entry has "LinkLinked" in brackets, and the Han 
entry has "LinkNotLinked". The addresses are the ones I usually get 
dynamically from my Router.

The above settings seem not to be good enough, because I can't open 
http://www.oberon.ethz.ch, f.i.

Any ideas?

Rene

>Rene,
>
>r> So, what paramters should I use?
>
>Desktops.OpenDoc  http://carnot.pathology.ubc.ca:80/Aos.Par 
>in case it will help.
>
>Regards,        ... Peter E.
>
>Desktops.OpenDoc  http://carnot.pathology.ubc.ca/
>
>--
>Oberon at lists.inf.ethz.ch mailing list for ETH Oberon and related systems
>https://www.mail.inf.ethz.ch/lists/listinfo/oberon
>
>
>  
>