[Oberon] NO & A2 bootSerialTrace for MailList archive.
Chris Glur
easlab at absamail.co.za
Mon Feb 23 18:38:02 MET 2009
A previous mail described how the bootSerialTrace for
NO workED. For my ver: 2001-beta; only the 'trace to
own screen' worked - for me.
-----------
Date: Tue, 5 Feb 2002 10:50:13 +0100 (MET)
From: fischer at inf.ethz.ch
Subject: Problems with Trace setting stored permanently (Native Alpha 11-Oct-2001)
..
Ran these tests with 2 machines attached via null-modem cable.
<etc. everything confirmed OK.>
=============
For A2 from a CD the bootSerialTraces with 3 different
IDEs are given below, as being possibley usefull for
other collaborators. I'll try to debug them later,
since the documentation seems quite substantial.
Thanks,
== Chris Glur. ============
Mon Feb 23 15:12:21 SAST 2009
=========
Machine: A2 Revision 1560 (27.08.2008)ult, you have to set them
Machine: Detecting memory... 32MB
Machine: 1 cores per physical package, 1 threads per core.
Machine: Enabling MMU... Ok
Heaps: Initializing heap... Ok
Machine: Single-processor
Kernel: Initialized and started.
{P cpuid= 0, pid= -1 PCI: 1 bus(ses) found, PCI version: 02.10}
ATADisks: Force PIO mode for ATAPI devices
ATADisks: Scanning PCI bus for IDE & SATA class devices ...
ATADisks: Found PCI device on bus 0, device 7, function 1
ATADisks: Adding controller 01F0, 03F0, E800, IRQ: 14: IDE0..1, Bus-master enabled
ATADisks: Adding controller 0170, 0370, E808, IRQ: 15: IDE2..3, Bus-master enabled
ATADisks: Detected devices:
IDE0: 38166MB, LBA, ATA/ATAPI-5, MW DMA 2, ST340016A, ver 5.0
IDE3: ATAPI cd-rom device, removable, no DMA, CD-956E/AKV
DiskFS: Index not found on RAM0
DiskFS: Scanning RAM0... marking 0 files
DiskFS: 31992K of 32000K available on RAM0
DiskVolumes: IDE0#0 invalid partition <------ ?? NO handles it but not DOS !!
DiskVolumes: IDE3#0 .[1] TRAP 8 PL 3 ASSERT failed A2 Revision 1560 (27.08.2008) <-- CD @ hdd ??
CS:=0000001B DS:=00000020 ES:=00000020 SS:=0000002B CR0=80040031 FPU=00000000
PC=0067FDD0 ESI=0067FB01 EDI=8411FF05 SP=8411FF2C CR2=8411DFFC PID=00000000
EAX=00180000 EBX=00000117 ECX=00005400 EDX=8411FF34 CR3=01FFE000 LCK=00000000
BP=8411FF5C FS:=00000000 GS:=00000000 ERR=00000000 CR4=00000000 TMR=000026ED
FLAGS: P#>_+I +3 {1..2, 9, 12..13, 21}
Process: 7 run 0 30067CF90:Commands.Runner ATADisks.Controller.ProtPacketPIO pc=6056 [000017A8H] {0, 28}
DisplayLinear.Init pc=568 [00000238H]
w=1024 h=768 f=2 mem=2097152 ( 200000H) res=0 ts="" padr=1179927 ( 120117H)
vadr=0
State DisplayLinear:
@Self=0067F910H d=00000000H
DisplayLinear.$$ pc=8 [00000008H]
@Self=0067F910H d=00000000H
Modules.ThisModule pc=1938 [00000792H]
name="DisplayLinear" res=0 msg=""... @PtrReturnType=00000000H m=0067F910H
p=0067F910H fileName="DisplayLinear.Obx" body=DisplayLinear.$$ pc=0 [00000000H]
new=TRUE i=1
Commands.Runner. at Body pc=671 [0000029FH]
@Self=0067CF90H
---------------------------------
{P cpuid= 0, pid= -1 Exception during command execution} <---------??
DriverDatabase: Enabled driver lookup service.
{P cpuid= 0, pid= 13 Usb: USB driver loaded.} <---- old-box has no USB-BIOS ??
Usb: Driver UsbHub (USB Hub Driver) has been added.
Default font installedOpenType 0.45 BBPort /3.12.2004 eos, pl
Online 00:11
============ end of trace ==================
?? Remove the USB info & Try a DOS-able IDE ==
Machine: A2 Revision 1560 (27.08.2008)ult, you have to set them
Machine: Detecting memory... 32MB
Machine: 1 cores per physical package, 1 threads per core.
Machine: Enabling MMU... Ok
Heaps: Initializing heap... Ok
Machine: Single-processor
Kernel: Initialized and started.
{P cpuid= 0, pid= -1 PCI: 1 bus(ses) found, PCI version: 02.10}
ATADisks: Force PIO mode for ATAPI devices
Machine: A2 Revision 1560 (27.08.2008)
Machine: Detecting memory... 32MB
Machine: 1 cores per physical package, 1 threads per core.
Machine: Enabling MMU... Ok
Heaps: Initializing heap... Ok
Machine: Single-processor
Kernel: Initialized and started.
{P cpuid= 0, pid= -1 PCI: 1 bus(ses) found, PCI version: 02.10}
ATADisks: Force PIO mode for ATAPI devices
ATADisks: Scanning PCI bus for IDE & SATA class devices ...
ATADisks: Found PCI device on bus 0, device 7, function 1
ATADisks: Adding controller 01F0, 03F0, E800, IRQ: 14: IDE0..1, Bus-master enabled
ATADisks: Adding controller 0170, 0370, E808, IRQ: 15: IDE2..3, Bus-master enabled
ATADisks: Detected devices:
IDE0: 8063MB, LBA, ATA/ATAPI-4, MW DMA 2, WDC WD84AA, ver 4.0
IDE3: ATAPI cd-rom device, removable, no DMA, CD-956E/AKV
DiskFS: Index not found on RAM0
DiskFS: Scanning RAM0... marking 0 files
DiskFS: 31992K of 32000K available on RAM0
DiskVolumes: IDE0#0 invalid partition <--------------- ??
DiskVolumes: IDE3#0 .[1] TRAP 8 PL 3 ASSERT failed A2 Revision 1560 (27.08.2008)
CS:=0000001B DS:=00000020 ES:=00000020 SS:=0000002B CR0=80040031 FPU=00000000
PC=00680350 ESI=00680081 EDI=8411FF05 SP=8411FF2C CR2=8411DFFC PID=00000000
EAX=00180000 EBX=00000117 ECX=00005400 EDX=8411FF34 CR3=01FFE000 LCK=00000000
BP=8411FF5C FS:=00000000 GS:=00000000 ERR=00000000 CR4=00000000 TMR=00001EB1
FLAGS: P#>_+I +3 {1..2, 9, 12..13, 21}
Process: 7 run 0 30067D510:Commands.Runner ATADisks.Controller.ProtPacketPIO pc=6056 [000017A8H] {0, 28}
DisplayLinear.Init pc=568 [00000238H]
w=1024 h=768 f=2 mem=2097152 ( 200000H) res=0 ts="" padr=1179927 ( 120117H)
vadr=0
State DisplayLinear:
@Self=0067FE90H d=00000000H
DisplayLinear.$$ pc=8 [00000008H]
@Self=0067FE90H d=00000000H
Modules.ThisModule pc=1938 [00000792H]
name="DisplayLinear" res=0 msg=""... @PtrReturnType=00000000H m=0067FE90H
p=0067FE90H fileName="DisplayLinear.Obx" body=DisplayLinear.$$ pc=0 [00000000H]
new=TRUE i=1
Commands.Runner. at Body pc=671 [0000029FH]
@Self=0067D510H
---------------------------------
{P cpuid= 0, pid= -1 Exception during command execution}
DriverDatabase: Enabled driver lookup service.
Default font installedOpenType 0.45 BBPort /3.12.2004 eos, pl
=================
Try a small old DOSable-IDE == tested to boot DOS
..
ATADisks: Adding controller 01F0, 03F0, E800, IRQ: 14: IDE0..1, Bus-master enabled, LBA not supported, DMA nod
ATADisks: InitDevice, res: 0
ATADisks: Adding controller 0170, 0370, E808, IRQ: 15: IDE2..3, Bus-master enabled
ATADisks: Detected devices:
IDE0: 40MB, 980*5*17, no DMA, ST351A/X
IDE3: ATAPI cd-rom device, removable, no DMA, CD-956E/AKV
DiskFS: Index not found on RAM0
DiskFS: Scanning RAM0... marking 0 files
DiskFS: 31992K of 32000K available on RAM0
IDE0 reset done
DiskVolumes: IDE0#0 error 1 <---- ??
DiskVolumes: IDE3#0 .[1] TRAP 8 PL 3 ASSERT failed A2 Revision 1560 (27.08.2008) <---?? CD-ROM
CS:=0000001B DS:=00000020 ES:=00000020 SS:=0000002B CR0=80040031 FPU=00000000
PC=0067F530 ESI=0067F261 EDI=8411FF05 SP=8411FF2C CR2=8411DFFC PID=00000000
EAX=00180000 EBX=00000117 ECX=00005400 EDX=8411FF34 CR3=01FFE000 LCK=00000000
BP=8411FF5C FS:=00000000 GS:=00000000 ERR=00000000 CR4=00000000 TMR=0000BE51
FLAGS: P#>_+I +3 {1..2, 9, 12..13, 21}
Process: 7 run 0 30067CA70:Commands.Runner ATADisks.Controller.ProtPacketPIO pc=6056 [000017A8H] {0, 28}
..
======================
More information about the Oberon
mailing list