[Oberon] Re (2): A2, targeting a Geode SC3200.

[peter at easthope.ca]

Previously,
> I'm interested to build an installer for A2 for ... a Geode SC3200 cpu.  

An installer was built in LinuxAos and A2 installed to IDE0#1 on 
a CF card.  Config strings are left as installed except for 
"Init=" and "TraceMode=1".  The display is visible at 
http://carnot.yi.org/TatungA2Trace.jpg .  
Appears familiar and OK down to,

No PCI BIOS32 detected
{P cpuid= 0, pid= -1 PCI: No bus found.}
ATADisks: Detected devices:
No devices found.
BootConsole: Nount failed on BootVol1

Odd that the kernel starts from a CF card which has an ATA interface 
yet PCI and ATA are reported to be absent.  Also, if Native Oberon 
is on the CF, it boots and opens tracks and viewers with no complaint. 

What might be done to let A2 mount the filesystem?

Thanks,                 ... Peter E.


-- 
123456789 123456789 123456789 123456789 123456789 123456789 123456789 12
Tel +1 360 639 0202   http://carnot.yi.org/   Bcc: peter at easthope. ca