[Oberon] Cheap chinese FPGA board - is it usable for PO?

Treutwein Bernhard Bernhard.Treutwein at Verwaltung.Uni-Muenchen.DE
Thu Nov 7 13:12:47 CET 2019

I stumbled recently over the following TANG Primer FPGA Development board, which uses an
Anlogic EGG4S20 FPGA, with the following specs:

Logical unit: 20K (LUT4/LUT5 hybrid architecture)
SRAM: About 130KB
SDRAM: Built-in 32bit bit width 64MBit
Flash: FPGA configuration Flash, 8Mbit User Flash, nor/nand optional
Download and debug: Onboard FPGA JTAG Download Debugger, RV debugger can debug hummingbird core
- FPC40P socket, can be connected to RGB LCD, VGA adapter board
- FPC24P socket, can be connected to DVP camera, high speed ADC module
- Resistive touch screen controller for I2C interface, used with RGB LCD

See: https://www.seeedstudio.com/Sipeed-TANG-PriMER-FPGA-Development-Board-p-2881.html
and/or https://wiki.sipeed.com/en/tang/premier.html
and/or https://tang.sipeed.com/en/hardware-overview/lichee-tang/  

Would it be usable for Project Oberon?

Mit freundlichen Grüßen
   Bernhard Treutwein
   Referat VI.3 Anwendungsbetreuung
   Ludwig-Maximilians-Universität, München
   Tel. 089 2180-2774
   Fax. 089 2180-992774
   Mobil. 0152-01549335
   e-mail: bernhard treutwein (at) verwaltung uni-muenchen de


More information about the Oberon mailing list