[Barrelfish-users] Fwd: Compiling barrelfish for intel SCC (single chip cloud)

[Stefan Kästle]

I attached some instructions on how to install ghc  6.10.4 to:
<http://wiki.barrelfish.org/Getting_Started#ghcInstall>

In case this does not work. Can you please append all commands you
execute and the complete output?

On Sat, 2011-09-10 at 15:44 +0200, Hayder Al-Khalissi wrote:
> Hi Stefan,
> 
> 
> Thanks for your response.
> 
> 
> In fact, I used new version ghc v6.12.3. I found this version
> (according to details of getting started) is possibly to use. 
> So, I should install ghc v6.10?How?
> 
> 
> Thanks
>  
> Best wishes 
> 
> 
> Hayder
> 
> 
> On Sat, Sep 10, 2011 at 11:45 AM, Stefan Kästle
> <stefan.kaestle at inf.ethz.ch> wrote:
>         Hi Hayder,
>         
>         your problem does not seem to be related to the SCC. Which
>         version of
>         ghc are you using?
>         
>         > ghc --version
>         
>         Not all versions of ghc are supported by hake. See the README
>         file
>         <http://hg.barrelfish.org/file/tip/README> for a list of
>         supported
>         version of ghc.
>         
>         Hope this helps
>          Stefan
>         
>         On Sat, 2011-09-10 at 08:59 +0000, Timothy Roscoe wrote:
>         > [ Forwarding to the mailing list ]
>         > email message attachment
>         
>         > > -------- Forwarded Message --------
>         > > From: Hayder Al-Khalissi
>         <hayder.alkhalissi at googlemail.com>
>         > > To: barrelfish-users-owner at lists.inf.ethz.ch
>         > > Subject: Compiling barrelfish for intel SCC (single chip
>         cloud)
>         > > Date: Fri, 9 Sep 2011 17:37:21 +0200
>         > >
>         > > Hi,
>         > >
>         > > Actually, I tried to compile barrelfish for SCC.
>         > > I have already replaced x86_64 by scc in command
>         (../hake/hake.sh -s .. -a x86_64), but I got this error
>         > > ((cannot satisfy -package ghc-paths)). Also, I tried to
>         fix by install ((libghc6-ghc-paths-dev)), but I have getting
>         alot of error as explaining in this sample:
>         > >
>         > > >> /tmp/ghc11088_0/ghc11088_0.s:5775:0:
>         > > >>  Error: bad register name `%r13)'
>         > > >> /tmp/ghc11088_0/ghc11088_0.s:5802:0:
>         > > >>  Error: `*(%rbp)' is not a valid 32 bit base/index
>         expression
>         > > >> /tmp/ghc11088_0/ghc11088_0.s:5829:0:
>         > > >>   Error: `*(%rbp)' is not a valid 32 bit base/index
>         expression
>         > > >> /tmp/ghc11088_0/ghc11088_0.s:5843:0:
>         > > >> Error: suffix or operands invalid for `movq'
>         > >
>         > > So, I have confused and I didn't know what I doing to
>         fixing this problems?
>         > >     Or from where I can get some detailed explanations
>         about getting_started barrelfish with SCC?.
>         > >
>         > > I am looking to hearing you.
>         > >
>         > > Thanks in Advance
>         > >
>         > > Hayder
>         > >
>         > >
>         
>         > _______________________________________________
>         > Barrelfish-users mailing list
>         > Barrelfish-users at lists.inf.ethz.ch
>         > https://lists.inf.ethz.ch/mailman/listinfo/barrelfish-users
>         
>         
> 
>