[Oberon] NIC in BB

[Thomas Frey]

I could reproduce the problem. Unfortunately the CD image only initializes 
the Network after the Autorun sequence. There are two workarounds:

1. wait for 1-2 minutes until the snow stops ;-)
2. press the shift key while booting and type
Boot4=
Boot9=Autostart.Run
c

--Thomas


----- Original Message ----- 
From: "Dan Parnete" <dan.parnete at fastwebnet.it>
To: "ETH Oberon and related systems" <oberon at lists.inf.ethz.ch>
Sent: Wednesday, December 29, 2004 11:29 AM
Subject: Re: [Oberon] NIC in BB


> shark at gulfnet.sd64.bc.ca wrote:
>
>>The 3C905 card works for PC Native 05.01.2003.
>>This message went through it.
>>
>>The BB Performance monitor records a signal
>>on the receive window.  The send window and the two loopback windows have 
>>flat lines.
>>
>>I've tried a little tinkering with the EPROM settings of the card and with 
>>the media and duplex parameters in Aos.Par to no avail.
>>
>>Can anyone suggest where to look to solve the problem?
>>
>>Thanks,        Peter E.
>>
>>
>>
>>
> The same with my RTL8139. It works with the Crazy Fresh of 24 nov., bat 
> not with the recent Xmas version.
>
> Thanks,
> Dan Parnete
> --
> Oberon at lists.inf.ethz.ch mailing list for ETH Oberon and related systems
> https://www.mail.inf.ethz.ch/lists/listinfo/oberon
>