[Oberon] network connection in Aos

[shark at gulfnet.sd64.bc.ca]

Now the only obstacle for Aos here is the network
connection.  Native Oberon works fine; no doubt 
that the hardware is OK.

The Aos.Par is visible with Desktops.OpenDoc  
http://carnot.pathology.ubc.ca/Aos.Par .  The 
Kernel.Log is appended.  In startup, the last action 
in Aos.Par which appears is  
Boot2="AosOberonInput;System.Init" .  The Oberon 
interface works.  The loopback device is not 
installed and nothing after that in Aos.Par has 
effect.

Did anyone find such a problem?  Any suggestions?

Thanks,              Peter

============================================
Aos 08.06.05, Kernel.Log
Single-processor
IDE0..1: 14 000001F0 000003F6 reset ok
IDE2..3: 15 00000170 00000376 reset ok
IDE2: no reset
IDE0: 402MB, 1010*16*51, QUANTUM LPS420A
IDE2: packet cd-rom device, removable, MATSHITA CR-593
Bus-master chipset not detected
AosDiskVolumes: IDE0{P0 INT39 0000}
#3
AosDiskFS: 41216K of 102708K available on IDE0#3
AosDiskVolumes: IDE0#2
AosDiskFS: 9124K of 40284K available on IDE0#2
AosDiskVolumes: IDE0#4
AosDiskFS: 169284K of 226740K available on IDE0#4
{P0 AosDisplayLinear: GlobalSetCacheProperties = 1505}
{P0 AosMouseSerial: MP=1}
{P0 AosMouseSerial: MT=MS1}
COM1 opened
COM1 closed
COM1 opened
COM1 closed
COM1 opened
COM1 closed
COM1 opened
{P0 ETH Oberon / Aos 08.06.05}
============================================


Desktops.OpenDoc  http://carnot.pathology.ubc.ca/