[Oberon] pci scan for sound device

[Søren Renner]

If I add the line "ScanPCI(vendorID,productID)" to the file
Aosi810Sound.Mod and recompile, should the sound device probably work?
Where in the numbers below do I find those two ID numbers?
"vendor/device 11063059" is one number. . .

NOTE: I was looking in a drawer this morning for my cufflinks when I
stumbled upon an RTK8139 card; my networking worries are over, thanks
to
the advice given in this forum. Thanks to all.

<?xml version="1.0" encoding="UTF-8"?>
<?bluebottle format version="0.1" ?>
<?xml-stylesheet type="text/xsl"
href="http://bluebottle.ethz.ch/bluebottle.xsl" ?>
<Text>
<Span style="Normal"><![CDATA[Bus 0, device 17, function 5: class/rev
04010060, vendor/device 11063059, status/cmd 02100001
	Class: Multimedia controller, Sub-class: Multimedia audio controller
	Vendor: VIA Technologies, Inc., Device: VT8233/A/8235/8237 AC97 Audio
Controller
	Driver: n/a
		IRQ5, INTC
		256B I/O at 0000C800-0000C8FF
	PCI Configuration Space Registers:
]]></Span><Span style="AdHoc Courier 10 0 0 800000FF
00000000"><![CDATA[		00h		30591106
		04h		02100001
		08h		04010060
		0Ch		00000000
		10h		0000C801
		14h		00000000
		18h		00000000
		1Ch		00000000
		20h		00000000
		24h		00000000
		28h		00000000
		2Ch		18771019
		30h		00000000
		34h		000000C0
		38h		00000000
		3Ch		00000305
]]></Span><Span style="Normal"><![CDATA[	Command Register:
		IO Space: On, Memory Space: Off, Bus Master: Off, Special Cycles:
Off, Memory Write and Invalidate: Off
		VGA Palette Snoop: Off, Parity Error Response: Off, Stepping
Control: Off, SERR#: Off, Fast Back-to-Back: Off
	Status Register:
		Capabilities List: Yes, 66MHz Capable: No, Fast Back-to-Back
Capable: No, Master Data Parity Error: No
		DEVSEL timing: Medium
		Signaled Target Abort: No, Received Target Abort: No, Received
Master Abort: No, Signaled System Error: No, Detected Parity Error:
]]></Span>

</Text>