[Oberon] Re (2): A2, targeting a Geode SC3200.

Felix Friedrich felix.friedrich at inf.ethz.ch
Wed Jan 28 22:12:22 CET 2015


Dear Peter,

you can try to replace I386.PCI.Mod by BiosFreePCI.Mod. That could help.

Regards
Felix


On 28.01.2015 21:41, peter at easthope.ca wrote:
> Previously,
>> I'm interested to build an installer for A2 for ... a Geode SC3200 cpu.
> An installer was built in LinuxAos and A2 installed to IDE0#1 on
> a CF card.  Config strings are left as installed except for
> "Init=" and "TraceMode=1".  The display is visible at
> http://carnot.yi.org/TatungA2Trace.jpg .
> Appears familiar and OK down to,
>
> No PCI BIOS32 detected
> {P cpuid= 0, pid= -1 PCI: No bus found.}
> ATADisks: Detected devices:
> No devices found.
> BootConsole: Nount failed on BootVol1
>
> Odd that the kernel starts from a CF card which has an ATA interface
> yet PCI and ATA are reported to be absent.  Also, if Native Oberon
> is on the CF, it boots and opens tracks and viewers with no complaint.
>
> What might be done to let A2 mount the filesystem?
>
> Thanks,                 ... Peter E.
>
>




More information about the Oberon mailing list