[Oberon] Global font change on OLR

[Peter Matthias]

Thanks for the information.
Environment variables here don't work as they should.

~/spot/OLR/olr# OWIDTH=800 OHEIGHT=600 ./oberon

should work.

Regards,
	Peter

Am 03.04.2016 um 16:41 schrieb Srinivas Nayak:
> Dear Peter,
>
>> Default display size of OLR is (1280-16)x(1024-32). This can be
>> configured via environment variables OWIDTH and OHEIGHT. Negative
>> values are relative to screen size. Or by changing the constants
>> defaultWidth and defaultHeight inside OLR.Display.Mod and recompiling.
>
>
> ~/spot/OLR/olr# echo $OHEIGHT
> 700
> ~/spot/OLR/olr# echo $OWIDTH
> 1000
> ~/spot/OLR/olr# ./oberon
> ~/spot/OLR/olr# OWIDTH=1024-16
> ~/spot/OLR/olr# OHEIGHT=768-32
> ~/spot/OLR/olr# ./oberon
> ~/spot/OLR/olr# OWIDTH=1024-5
> ~/spot/OLR/olr# OHEIGHT=768-10
> ~/spot/OLR/olr# ./oberon
> ~/spot/OLR/olr# OWIDTH=800-10
> ~/spot/OLR/olr# OHEIGHT=600-5
> ~/spot/OLR/olr# ./oberon
>
> I tried all these.
> I see some changes due to the negative value.
> The window starts at some offset from left hand side.
> But no changes in window size!
>
> Am I doing wrong?
>
>
> With thanks and best regards,
>
> Yours sincerely,
> Srinivas Nayak
>
> Home: http://www.mathmeth.com/sn/
> Blog: http://srinivas-nayak.blogspot.in/
>
> On 04/03/2016 06:40 PM, Peter Matthias wrote:
>>
>>
>> Am 03.04.2016 um 05:16 schrieb Srinivas Nayak:
>>> Dear Peter,
>>>
>>> I am worried if a solution to my problem is difficult to achieve. :-(
>>
>> Oberon misses some years of development...
>>
>>> Another surprising thing is that, right now I have OLR as well as
>>> NO alpha installed on Virtualbox.
>>> NO on vbox has resolution of 800*600, configured to vesa 2.0 mode
>>> 800*600*8.
>>> OLR is bigger than that. Don't know how to check the resolution. (looks
>>> like it is 1000+ * 800+)
>>
>> Default display size of OLR is (1280-16)x(1024-32). This can be
>> configured via environment variables OWIDTH and OHEIGHT. Negative
>> values are relative to screen size. Or by changing the constants
>> defaultWidth and defaultHeight inside OLR.Display.Mod and recompiling.
>>
>>> But in both the Oberon, I see small fonts, hard to read!
>>>
>>>
>>> Don't you all suffer from small fonts?
>>
>> I don't (yet) suffer from it. But that might come soon.
>>
>> Regards,
>>      Peter
>>>
>>> On 04/03/2016 01:07 AM, Peter Matthias wrote:
>>>>
>>>>
>>>> Am 02.04.2016 um 12:17 schrieb Srinivas Nayak:
>>>>> Dear All,
>>>>>
>>>>> I found OLR easier to use while I am on Linux.
>>>>> I think the font size of OLR Oberon is small.
>>>>> How can I change the font size to a bigger one?
>>>>
>>>> Oberon hast the fond, including it's size stored in the text. So there
>>>> is no easy way to change size for existing text. For new text, you can
>>>> make a new line in the System section of Oberon.Text (e.g. below
>>>> TimeDiff line) with DefaultFont = "Oberon14.Scn.Fnt". However, the
>>>> textual system has some problems with non standard Font sizes.
>>>>
>>>> Maybe the easiest way would be to rename the font files like
>>>> "System.RenameFiles Oberon10.Scn.Fnt => Oberon8.Snc.Fnt ~"
>>>>
>>>> With the appearance of Retina displays, a general solution is needed.
>>>>
>>>> Regards,
>>>>      Peter
>>>> --
>>>> Oberon at lists.inf.ethz.ch mailing list for ETH Oberon and related
>>>> systems
>>>> https://lists.inf.ethz.ch/mailman/listinfo/oberon
>>>>
>>> --
>>> Oberon at lists.inf.ethz.ch mailing list for ETH Oberon and related systems
>>> https://lists.inf.ethz.ch/mailman/listinfo/oberon
>>>
>> --
>> Oberon at lists.inf.ethz.ch mailing list for ETH Oberon and related systems
>> https://lists.inf.ethz.ch/mailman/listinfo/oberon
>>
> --
> Oberon at lists.inf.ethz.ch mailing list for ETH Oberon and related systems
> https://lists.inf.ethz.ch/mailman/listinfo/oberon
>