[Oberon] FPGA - nRF24L01 connection

[Tomas Kral]

On Fri, 6 Apr 2018 14:47:20 +0200
Jörg <joerg.straube at iaeth.ch> wrote:

> SCC.Start
Yes, I see, With my current SW setting I got channel `5'.
I changed RF_CH from 76 (default) to 5 and recompiled the gateway.
These parameters are now reported.

================ NRF Configuration ================
STATUS		 = 0x0e RX_DR=0 TX_DS=0 MAX_RT=0 RX_P_NO=7
TX_FULL=0 RX_ADDR_P0-1	 = 0xa8a8e1fc00 0xa8a8e1fc00
RX_ADDR_P2-5	 = 0xff 0xc4 0xc5 0xc6
TX_ADDR		 = 0xe7e7e7e7e7
RX_PW_P0-6	 = 0x20 0x20 0x20 0x00 0x00 0x00
EN_AA		 = 0x3b
EN_RXADDR	 = 0x06
RF_CH		 = 0x05
RF_SETUP	 = 0x23
CONFIG		 = 0x0e
DYNPD/FEATURE	 = 0x3f 0x06
Data Rate	 = 250KBPS
Model		 = nRF24L01+
CRC Length	 = 16 bits
PA Power	 = PA_LOW

I wonder what other parameters I need to change to match Oberon SCC.Mod?

Many thanks

-- 
Tomas Kral <thomas.kral at email.cz>