[Oberon] Product idea

[Magnus Karlsson]

Workstation setup


On 5/15/2020 1:32 AM, Magnus Karlsson wrote:
>
> I have a device that was originally designed for another purpose but 
> could serve as a pretty nice "Oberon-box".
> It's made out of very nice milled aluminum and is about 130 x 90 mm in 
> size.  It uses an external 5V power supply.
>
> On the front there are 2 PS/2 connectors for keyboard/mouse, a full 
> size SD-card slot, two buttons (power, reset) and 2 red/green LEDs.
> On the back there is a HDMI connector for video out, USB connector for 
> serial/JTAG, 1 Gb ethernet jack, 18 DIO pins and power jack.
>
> The board inside is based on a Spartan6 LX45 with a 64 MB LPDDR memory 
> chip (i.e. very similar to Pipistrello).
>
> Would there be any interest in such a product?
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.inf.ethz.ch/pipermail/oberon/attachments/20200514/3fe544c3/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ws.jpg
Type: image/jpeg
Size: 74832 bytes
Desc: not available
URL: <http://lists.inf.ethz.ch/pipermail/oberon/attachments/20200514/3fe544c3/attachment-0001.jpg>