[Oberon] Product idea

[Chris Burrows]

That looks very neat! I am interested in buying at least a couple of boxes. If it works well with Astrobe for RISC5 I'll add it to the list of boards that we support,

Regards,
Chris Burrows
CFB Software
https://www.astrobe.com/RISC5


From: Oberon [mailto:oberon-bounces at lists.inf.ethz.ch] On Behalf Of Magnus Karlsson
Sent: Friday, 15 May 2020 3:22 PM
To: oberon at lists.inf.ethz.ch
Subject: Re: [Oberon] Product idea

Workstation setup


On 5/15/2020 1:32 AM, Magnus Karlsson wrote:
I have a device that was originally designed for another purpose but could serve as a pretty nice "Oberon-box".
It's made out of very nice milled aluminum and is about 130 x 90 mm in size.  It uses an external 5V power supply.
On the front there are 2 PS/2 connectors for keyboard/mouse, a full size SD-card slot, two buttons (power, reset) and 2 red/green LEDs.
On the back there is a HDMI connector for video out, USB connector for serial/JTAG, 1 Gb ethernet jack, 18 DIO pins and power jack. 
The board inside is based on a Spartan6 LX45 with a 64 MB LPDDR memory chip (i.e. very similar to Pipistrello).
Would there be any interest in such a product?