[Oberon] PO2013 - Show Heap Blocks

[John R. Strohm]

Out.printf(), with VARIADIC arguments, in Oberon???

And that %d%) bothers me, for some reason...

--- joerg.straube at iaeth.ch wrote:

From: Jörg <joerg.straube at iaeth.ch>
To: ETH Oberon and related systems <oberon at lists.inf.ethz.ch>
Subject: Re: [Oberon] PO2013 - Show Heap Blocks
Date: Fri, 19 Jun 2020 10:37:08 +0200

Tomas

The following line will give you the stats as well:
  Out.printf(“Heap space used: %d bytes (=%d%)\n“,
    Kernel.allocated,
    Kernel.allocated * 100 DIV (Kernel.heapLim - Kernel.heapOrg), ““);

That‘s basically what System.Watch does.

br
Jörg


> Am 19.06.2020 um 10:12 schrieb Tomas Kral <thomas.kral at email.cz>:
> 
> Hi,
> 
> This is my understanding so far, it stats the heap.
> It also shows free block last to the limit, because heap ends 16 bytes
> earlier, so is not MOD 32.
> 
> MODULE Heap; (*TK 14.6.2020 show heap blocks*)
>  IMPORT S := SYSTEM, Kernel, Out;
> 
>  VAR heapOrg, MemLim, heapLim: INTEGER;
> 
>  PROCEDURE Scan*;
>    VAR p, q, mark, tag, size, used, free: LONGINT;
>  BEGIN p := heapOrg; used := 0; free := 0;
>    Out.Hex(heapOrg); Out.Ln; (*60000H 4-bit colour display*)
>    Out.Hex(heapLim); Out.Ln; (*9FEF0H*)
>    REPEAT S.GET(p+4, mark); q := p; (*mark: 0 used, -1 freed, >0 marked*)
>      IF mark = -1 THEN S.GET(p, size)
>      ELSE S.GET(p, tag); S.GET(tag, size); (*size := p - q*) END ;
>      IF (size MOD 32 # 0) & (size MOD 64 # 0) & (size MOD 128 # 0) & (size MOD 256 # 0) THEN
>        Out.Hex(p); Out.Hex(size); Out.Hex(mark); Out.Ln (*free block to 9FEF0H*)
>      END ;
>      IF mark > 0 THEN INC(used, size) (*none after kernel scan*)
>      ELSIF mark = 0 THEN INC(used, size) 
>      ELSIF mark = -1 THEN INC(free, size) END ;
>      INC(p, size)
>    UNTIL p >= heapLim(*-30000H*) ;
>    Out.Int(used, 8); (*value*) Out.Int(used*100 DIV free, 3); (*percentage*)
>    Out.Hex(free+used); Out.Ln (*3FEF0 = 9FEF0H-60000H, or less if fragmented*)
>  END Scan;
> 
>  PROCEDURE Lists*;
>    VAR p, list0, list1, list2, list3: INTEGER;
>  BEGIN
>    p := S.ADR(Kernel.MemLim);
>    S.GET(p+8, list0);
>    S.GET(p+12, list1);
>    S.GET(p+16, list2);
>    S.GET(p+20, list3);
>    Out.Hex(list3); Out.Hex(list2); Out.Hex(list1); Out.Hex(list0); Out.Ln
>  END Lists;
> 
> BEGIN S.GET(12, MemLim); S.GET(24, heapOrg); heapLim := MemLim
> END Heap.
> 
> Heap.Scan
> Heap.Lists
> 
> 
> -- 
> Tomas Kral <thomas.kral at email.cz>
> --
> Oberon at lists.inf.ethz.ch mailing list for ETH Oberon and related systems
> https://lists.inf.ethz.ch/mailman/listinfo/oberon

--
Oberon at lists.inf.ethz.ch mailing list for ETH Oberon and related systems
https://lists.inf.ethz.ch/mailman/listinfo/oberon