[Oberon] Re (5?): Networking ETH Oberon on QEMU.

[peter at easthope.ca]

Michael and Joerg,

Thanks for the help.  The tap interface seems OK. NetNe2000 seems OK. 
ping from the host to the guest works.

Some failures remain.  See below.

peter at joule:/home/peter$ ip link show tap0
6: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNO
WN mode DEFAULT group default qlen 1000
    link/ether 62:ae:5c:a7:4e:05 brd ff:ff:ff:ff:ff:ff

peter at joule:/home/peter$ ip addr show tap0
6: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNO
WN group default qlen 1000
    link/ether 62:ae:5c:a7:4e:05 brd ff:ff:ff:ff:ff:ff
    inet 172.23.8.1/24 brd 172.23.8.255 scope global tap0
       valid_lft forever preferred_lft forever
    inet6 fe80::60ae:5cff:fea7:4e05/64 scope link
       valid_lft forever preferred_lft forever

peter at joule:/home/peter$ ip route show 172.23.8.2/24
172.23.8.0/24 dev tap0 proto kernel scope link src 172.23.8.1

etho appears in /etc/hosts but nslookup fails. (?) 

peter at joule:/home/peter$ nslookup etho
Server:         192.168.43.1
Address:        192.168.43.1#53

Non-authoritative answer:
Name:   etho
Address: 184.151.127.26
** server can't find etho: NXDOMAIN

Also ftp from the Oberon  guest to the host has read access.  No write 
access.

Regards,               ... P.

-- 
https://en.wikibooks.org/wiki/Medical_Machines
https://en.wikibooks.org/wiki/Oberon
Tel: +1 604 670 0140            Bcc: peter at easthope. ca