[Oberon] FPGA - nRF24L01 connection
thomas.kral at email.cz
Thu Apr 5 15:10:50 CEST 2018
I have two Nordic wireless modules. I have wired one of them to my
RPI, see photo, the other should plug into Pepino Oberon FPGA board.
I have also compiled a gateway from `MySensors' git repo.
Running the gateway gives following.
Protocol version - 1.4
Created PTY '/dev/pts/2'
Gateway tty: /dev/ttyMySensorsGateway
================ SPI Configuration ================
CSN Pin = CE0 (PI Hardware Driven)
CE Pin = Custom GPIO25
Clock Speed = 8 Mhz
================ NRF Configuration ================
When I use a serial cable over USB (FTDI), I just access serial
as /dev/ttyUSB1 device, and I use PCLink at Oberon end.
But, how do I exchange data with Oberon over wireless, what is the
gateway device, do I need to modify RF24.Mod?
Many thanks in advance.
Tomas Kral <thomas.kral at email.cz>
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 26664 bytes
Desc: not available
More information about the Oberon