[Barrelfish-users] how to configure grub on ubuntu to allow barralfish

[mohammed shambakey]

Dear all
I want to configure grub on ubuntu 9.10 to allow barrelfish to appear in the
menu list.
I made a "barrelfish" folder under /boot and run the command "make install
INSTALL_PREFIX=/boot/barrelfish", and it gave the following output:-

for m in x86_64/sbin/bcast x86_64/sbin/barriers x86_64/sbin/ring_barriers
x86_64/sbin/bench x86_64/sbin/bfscope x86_64/sbin/bindtest
x86_64/sbin/bomp_benchmark_cg x86_64/sbin/bomp_benchmark_ft
x86_64/sbin/bomp_benchmark_is x86_64/sbin/chips x86_64/sbin/datagatherer
x86_64/sbin/driver_msd x86_64/sbin/e1000n x86_64/sbin/echoserver
x86_64/sbin/ehci x86_64/sbin/elver x86_64/sbin/fbdemo x86_64/sbin/fish
x86_64/sbin/hpet x86_64/sbin/init x86_64/sbin/ipi_bench x86_64/sbin/loadgen
x86_64/sbin/loadgen_1core x86_64/sbin/lpc_kbd x86_64/sbin/lpc_timer
x86_64/sbin/lrpc_bench x86_64/sbin/lwip_generator x86_64/sbin/lwip_loopback
x86_64/sbin/mem_affinity x86_64/sbin/mem_serv x86_64/sbin/memtest
x86_64/sbin/monitor x86_64/sbin/multicast x86_64/sbin/nfstest
x86_64/sbin/pc_bench x86_64/sbin/pc_bench_noload x86_64/sbin/pci
x86_64/sbin/pixels x86_64/sbin/router x86_64/sbin/serial x86_64/sbin/skb
x86_64/sbin/slideshow x86_64/sbin/spantest x86_64/sbin/cpu; do \
      if [ ! -f /boot/barrelfish/$m ] || \
          [ $(stat -c%Y $m) -ne $(stat -c%Y /boot/barrelfish/$m) ]; then \
        echo Installing $m; \
        mkdir -p /boot/barrelfish/$(dirname $m); \
        install -p $m /boot/barrelfish/$m; \
      fi; \
    done;
Installing x86_64/sbin/bcast
Installing x86_64/sbin/barriers
Installing x86_64/sbin/ring_barriers
Installing x86_64/sbin/bench
Installing x86_64/sbin/bfscope
Installing x86_64/sbin/bindtest
Installing x86_64/sbin/bomp_benchmark_cg
Installing x86_64/sbin/bomp_benchmark_ft
Installing x86_64/sbin/bomp_benchmark_is
Installing x86_64/sbin/chips
Installing x86_64/sbin/datagatherer
Installing x86_64/sbin/driver_msd
Installing x86_64/sbin/e1000n
Installing x86_64/sbin/echoserver
Installing x86_64/sbin/ehci
Installing x86_64/sbin/elver
Installing x86_64/sbin/fbdemo
Installing x86_64/sbin/fish
Installing x86_64/sbin/hpet
Installing x86_64/sbin/init
Installing x86_64/sbin/ipi_bench
Installing x86_64/sbin/loadgen
Installing x86_64/sbin/loadgen_1core
Installing x86_64/sbin/lpc_kbd
Installing x86_64/sbin/lpc_timer
Installing x86_64/sbin/lrpc_bench
Installing x86_64/sbin/lwip_generator
Installing x86_64/sbin/lwip_loopback
Installing x86_64/sbin/mem_affinity
Installing x86_64/sbin/mem_serv
Installing x86_64/sbin/memtest
Installing x86_64/sbin/monitor
Installing x86_64/sbin/multicast
Installing x86_64/sbin/nfstest
Installing x86_64/sbin/pc_bench
Installing x86_64/sbin/pc_bench_noload
Installing x86_64/sbin/pci
Installing x86_64/sbin/pixels
Installing x86_64/sbin/router
Installing x86_64/sbin/serial
Installing x86_64/sbin/skb
Installing x86_64/sbin/slideshow
Installing x86_64/sbin/spantest
Installing x86_64/sbin/cpu

but when I restart, no barrelfihs is in the boot menu. When I looked at boot
folder, I think that just creating a "barrelfish" folder and copying files
to it is not enough, but I don't know what to do.

Please, if any one had completed installation on ubuntu 9.10, can you write
down the steps?

Regards

Mohammed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.inf.ethz.ch/pipermail/barrelfish-users/attachments/20100524/fc678476/attachment.html