[Oberon] Networking problems

Sat Oct 8 00:45:06 CEST 2005

Hi,

sometimes ago I stated that I had completed the installation of BB 
latest stable to a FAT HDD IDE3#01, but that I still had problems with 
the network installation.

Someone told me to add specific files.

So I have now switched to the "crazy" fresh version, and here are the files.

My problem is that the same machine under windows has no problem with 
networking at all.

I use:

A netgear router in connection with a cabel modem to connect to the 
internet.
A Realtek 8139 network adapter to connect teh PC to the router.

DHCP is enabled.

I still get the message "LinkNotLinked" for the RTL8139-card. Under 
WinXP, the same card works perfectly.

Any ideas? .

Rene
-------------- nächster Teil --------------
Ein Dateianhang mit Bin?rdaten wurde abgetrennt...
Dateiname   : AosConfig.XML
Dateityp    : text/xml
Dateigr??e  : 8357 bytes
Beschreibung: nicht verf?gbar
URL         : https://lists.inf.ethz.ch/pipermail/oberon/attachments/20051008/45c69adc/AosConfig.xml
-------------- nächster Teil --------------
Log started
Aos 23.09.05
Single-processor
IDE0..1: 14 000001F0 000003F6 reset ok
IDE2..3: 15 00000170 00000376 reset ok
IDE2: no reset
IDE3: no reset
IDE0: 76345MB, 16383*16*63, (155114*16*63), LBA, MAXTOR 6L080J4, ver 5.21
IDE1: 3077MB, 6253*16*63, ST33232A
IDE2: packet cd-rom device, removable, TOSHIBA DVD-ROM SD-M1612, ver 5.19
IDE3: packet cd-rom device, removable, _NEC DVD_RW ND-1300A
IDE0..1: Bus-master enabled
IDE2..3: Bus-master enabled
AosDiskVolumes: IDE1#1
AosDiskFS: 141756K of 205084K available on IDE1#1
{P0 AosDisplayLinear: GlobalSetCacheProperties = 2304}
AosInput: KeyD.Bin
AosUhci: Initialised USB UHCI controller at base 0B400H, Irq: 10  USB version: 1.0
AosUhci: Initialised USB UHCI controller at base 0B000H, Irq: 9  USB version: 1.0
AosUsb: Driver UsbHub (integrated USB hub driver) has been added.
AosUsb: USB driver loaded.
AosUsb: Driver UsbMouse (USB mouse driver) has been added.
AosUsb: Driver UsbKeyboard (USB Keyboard Driver) has been added.
AosUsb: Logitech USB-PS/2 Optical Mouse attached to USBHC0 port 1.
USB mouse found.
AosUsbMouse: Mousewheel hack applied
USB mouse connected.
AosUsb: Registered USB device driver: UsbMouse00
Default font installedOpenType 0.45 BBPort /3.12.2004  eos, pl
Manager.New finished
Disp.format =     2
{P0 Bottom up...New background-->Mouse Cursor-->NIL
}
Searching devices...
Found model nr :   0
{P0 chipset version unknown... assuming RTL-8139}
Chip version is: FFFFFFFF RTL-8139
Install IRQ Handler:   255
Find finished.
AosInitNet: Module initialized. Searching for installed devices...
AosInitNet: LinkDevice 'Loopback' found.
AosInitNet: LinkDevice 'Loopback': Get interface configuration. Error code: 0
AosInitNet: Add interface for LinkDevice 'Loopback'. Error code: 0
{P0 
=== Interface ===
Interface name: Loopbackv6
Attached device: Loopback (LinkLinked)
MAC address: 00:00:00:00:00:00:00:00
Local address: ::1
Default routers:
Prefix: ::/64
DNS server: none
}
AosInitNet: Add interface for LinkDevice 'Loopback'. Error code: 0
{P0 
=== Interface ===
Interface name: Loopbackv4
Attached device: Loopback (LinkLinked)
MAC address: 00:00:00:00:00:00:00:00
Local address: 127.0.0.1
Netmask: 255.255.0.0
Gateway address: 
Subnet: 127.0.0.0
Net broadcast: 127.0.255.255
DNS server: none
}
AosInitNet: LinkDevice 'RTL8139#0' found.
AosInitNet: LinkDevice 'RTL8139#0': Get interface configuration. Error code: 0
AosInitNet: Add interface for LinkDevice 'RTL8139#0'. Error code: 0
{P0 
=== Interface ===
Interface name: v6link-localRTL8139#0
Attached device: RTL8139#0 (LinkNotLinked)
MAC address: FF:FF:FF:FF:FF:FF:00:00
Local address: FE80::FDFF:FFFF:FEFF:FFFF
Default routers:
Prefix: FE80::/64
DNS server: none
}
AosInitNet: Add interface for LinkDevice 'RTL8139#0'. Error code: 0
AosInitNet: Finished searching for installed devices.
AosDHCP: Starting DHCP on interface 'v4autoRTL8139#0'...
{P0 AosDHCP: Discover - xid 476191843}
Autostart: executing StartMenu.Open
Loading range 00007E4A..00007F4A
Loading range 00007945..00007A45
Loading range 00008B57..00008C57
Loading range 00008955..00008A55
Loading range 0000622E..0000632E
Loading range 0000F51C..0000F51E
Loading range 00005420..00005520
Loading range 0000531F..0000541F
Loading range 0000F532..0000F538
Loading range 00004E1A..00004F1A
Autostart: executing WMRestorable.Load Auto.dsk
Macro file Macros.XML loaded.
Parallel Compiler / prk
Can't open file: PETScratch.Text
loading
{P0 AosDHCP: Discover - xid 476191844}
{P0 AosDHCP: Discover - xid 476191845}
{P0 Starting logger}
Interfaces:
----------------------
{P0 
=== Interface ===
Interface name: v4autoRTL8139#0
Attached device: RTL8139#0 (LinkNotLinked)
MAC address: FF:FF:FF:FF:FF:FF:00:00
Local address: 
Netmask: 
Gateway address: 
Subnet: 
Net broadcast: 255.255.255.255
DNS server: none
}
{P0 
=== Interface ===
Interface name: v6link-localRTL8139#0
Attached device: RTL8139#0 (LinkNotLinked)
MAC address: FF:FF:FF:FF:FF:FF:00:00
Local address: FE80::FDFF:FFFF:FEFF:FFFF
Default routers:
Prefix: FE80::/64
DNS server: none
}
{P0 
=== Interface ===
Interface name: Loopbackv4
Attached device: Loopback (LinkLinked)
MAC address: 00:00:00:00:00:00:00:00
Local address: 127.0.0.1
Netmask: 255.255.0.0
Gateway address: 
Subnet: 127.0.0.0
Net broadcast: 127.0.255.255
DNS server: none
}
{P0 
=== Interface ===
Interface name: Loopbackv6
Attached device: Loopback (LinkLinked)
MAC address: 00:00:00:00:00:00:00:00
Local address: ::1
Default routers:
Prefix: ::/64
DNS server: none
}

IP statistics:
----------------------
NIPSentToSubnet         0
NIPSentToGateway         0
NIPSentBroadcast         3
NIPCantFragment         0
NIPRcvTotal         0
NIPTooSmall         0
NIPBadVersion         0
NIPOptions         0
NIPBadChecksum         0
NIPBadLength         0
NIPTrim         0
NIPBadHdrLen         0
NIPNotForUs         0
NIPCantReassemble         0
NIPSrcIsBroadcast         0
NIPDelivered         0
NIPNoReceiver         0
NIPForwarded         0
NIPSentLocalLoopback         0
NIPSentPointToPoint         0

AosDHCP: Finished DHCP on interface 'v4autoRTL8139#0'. Error code: 3502
-------------- nächster Teil --------------
# Aos config strings

# You must correctly configure at least section 1 below.  The other sections have reasonable defaults.

# To make a bootable partition or Diskette (from Native Oberon or Aos), use the following commands:

# Partitions.UpdateBootFile IDE1#01 AosIDE.Bin ~
# For a USB driver, use AosUSB.Bin instead of AosIDE.Bin
# For an Adaptec 7xxx SCSI driver, use AosAda7.Bin instead of AosIDE.Bin

# Partitions.SetConfig IDE1#01
# Add "~" at end of this text, so that SetConfig can read its parameters directly here.

# --- 1. BOOT PARTITION

# Boot device and partition number
BootVol1="AOS AosFS IDE1#01"
#Enable BootFromUsb for booting from USB stick
#BootFromUsb="1"
AosFS="AosDiskVolumes.New AosDiskFS.NewFS"

# --- 2. DISPLAY DRIVER

Boot="AosDisplayLinear"
# VESA 2.0 mode 117 : 1024x768x16  11A : 1280x1024x16
Init="117"

# --- 3. ADDITIONAL DRIVERS
Boot1="AosKeyboard;AosMousePS2;AosUsbUhci.Init;AosUsb.Init;AosUsbMouse.Init;AosUsbKeyboard.Init"
# Replace Boot1 with the following line you have a serial port mouse
#Boot1="AosKeyboard;AosMouseSerial"

# --- 4. STARTUP THE WINDOWING SYSTEM

# Aos 2D Menu
Boot2="WindowManager.Install"
# Autostart executes commands in AosConfig.XML's "Autostart" section

# or Oberon for Aos in full-screen mode (remove Boot3 from above!)
#Boot2="AosOberonInput;System.Init"

# Boot Oberon with Aos Menu at startup
#BootSystem="AosDisplayWM.Install Oberon 900x700;System.Init Oberon"

# --- 5. NETWORK DRIVER

# Local loopback device
Boot3="AosLoopback.Install"

# 3Com 3C90x EtherLink XL 10/100Mbps ethernet driver
# 3C90xMedia: 1=10Base-T, 5=100Base-TX (3C900), 6=100Base-RX, 9=auto
# 3C90xDuplex: 0=preset, 1=half-duplex, 2=full-duplex
#Boot4="Aos3Com90x.Install"
# Only set following if default does not work
#3C90xMedia="9"
#3C90xDuplex="2"

# 3Com 3C509 EtherLink III 10Mbps ethernet driver
Boot4="Aos3Com509.Install"

# RTL 8139 10/100Mbps ethernet driver
#Boot4="AosRTL8139.Install"

# RTL 8169 Gigabit ethernet driver
#Boot4="AosRTL8169.Install"

# Intel 8255x 10/100 Mbps Ethernet Controller Family driver
#Boot4="AosIntel8255x.Install"

# VMWare device driver - may be combined with another driver name in Boot4= - use ";" as delimiter
#Boot4="AosAM79C970.Install"

# --- 6. TCP/IP NETWORK PARAMETERS
#
# Network configuration has changed since July 1, 2005, is now stored in AosConfig.XML
#
# This initializes all IP interfaces defined in config and listens to insertion/removal of network cards.
Boot5="AosInitNet.Init"

# --- 7. STARTUP HIGHLEVEL APPS
Boot9="Autostart.Run"

# --- 8. MISCELLANEOUS

# Keyboard table options: System.Directory Key*.Bin
Keyboard="KeyD.Bin"

# TraceMode: 1=screen, 2=waitkey, 4=v24 (additive)
#TraceMode="4"
#TracePort="1"
#TraceBPS="38400"
#TraceMem="0B8000H,80,25"

# Additional tracing
#TraceHeap="0"
#TraceHeap="4096"

# Disk cache size in 4KB units (make negative to enable write-back caching)
CacheSize="1000"

# Profiling and timeslicing timer rate in Hz (default 1000)
#TimerRate=1000

# To enable Ctrl as emulation of the mouse middle button
#MB="2"

# Automatic power management (APM) must be disabled
APM="0"

# Disable the primary IDE controller
#IDE0="0"

# Limit the number of processors recognized (set negative for single-processor emulation)
#MaxProcs="1"

# Set watchdog timer for Oberon.Loop in seconds
#OberonWatch="0"

 ~ uncomment this line when using Partitions.SetConfig