[Oberon] Oberon on Nexys DDR4 from Digilent?

[Pablo Cayuela]

I would put my real cents to donate the board to Chris Burrows.
What do you think fellows?

I could also help him to port Oberon to Nexys 4 DDR with our students help.
We have one previous version with Artix7 but without DDR at our university
laboratory.

Prof. Pablo Cayuela
UTN FRC
Cordoba
Argentina



El feb. 21, 2018 4:38, "Chris Burrows" <chris at cfbsoftware.com> escribió:

> -----Original Message-----
> From: Oberon [mailto:oberon-bounces at lists.inf.ethz.ch] On Behalf Of
> Paul Reed
> Sent: Tuesday, 20 February 2018 4:14 AM
> To: ETH Oberon and related systems
> Subject: Re: [Oberon] Oberon on Nexys DDR4 from Digilent?
>
>
> > I'd like to use Oberon on this board.
>
> Can you tell us more about your intended application?  If you can get
> by with a quarter of the RAM (using the 35T's internal block RAM; or
> half, if the 100T version becomes available again) you may be able to
> use CFB Software's Astrobe for RISC5 and Embedded Project Oberon:
>
> http://www.astrobe.com/RISC5/
>
> Chris, what do you think?
>

I wouldn't expect any problems as Embedded Project Oberon already runs well
on Xilinx's Artix-7 35T on Digilent's Arty A7 and Cmod A7-35T boards. If
anybody wants us to support it on the Nexys DDR4 from Digilent all they
would need to do is supply us with a board to run it on. We would return the
board to them if unsuccessful.

Regards,
Chris Burrows

CFB Software
http://www.astrobe.com/RISC5




--
Oberon at lists.inf.ethz.ch mailing list for ETH Oberon and related systems
https://lists.inf.ethz.ch/mailman/listinfo/oberon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.inf.ethz.ch/pipermail/oberon/attachments/20180222/1a6e3f8a/attachment.html>