[Oberon] [SPAM | WERBUNG] Re: Oberon system 3 runs on realRaspberry Pi hardware

[Ulrich Hoffmann]

Hello Rochus,

thanks for the hints about USB intialization. Beeing patient, it now works - however with strange results:

+ The original Raspberry Pi Mouse works fine.
- The original Raspberry Pi Keyboard does not work regardless of the USB port used
- The trackpoint on the Lenovo keyboard just gives y values so the mouse cursor just moves vertically.
+ The Lenovo Keyboard keys work fine.

So - I now have a working combo (Pi mouse and Lenovo keyboard).

Let me know if you need any information about my specific keyboard models or log files...

Best regards,
	Ulrich


> Am 15.04.2026 um 11:42 schrieb Rochus Keller <me at rochus-keller.ch>:
> 
> @ Ulrich Hoffmann
> 
> It takes about 30 seconds until first the hub and then the devices are found. You can recognize on the screen that the mouse is ready when the mouse cursor appears. I currently try to make this faster. 
> 
> I also observed that there are still issues with older SD cards. I have some which flash ok and even start the display, but then at a later stage fail to read modules. This can be seen when attaching a TTL cable at the UART pins and monitoring the boot via console output. Maybe try with another (newer) SD card if the issue persists.
> 
> Best regards
> R.K.
> --
> Oberon at lists.inf.ethz.ch mailing list for ETH Oberon and related systems
> https://lists.inf.ethz.ch/mailman/listinfo/oberon